S1 Lifer Terry Helmet Liners
Nuovo design più largo per una maggiore copertura e assorbimento del sudore.
Aggiorna il tuo casco S1 Lifer con i Terry Liners: nuovi, resistenti, lavabili e altamente assorbenti.
Il S1 Lifer Terry Liner è un liner di ricambio per la calzata del casco Lifer, realizzato con tessuto in spugna (terry) cucito. A differenza dei liner standard S1 Lifer, il tessuto in spugna è completamente cucito al liner, sigillato alle estremità e copre sia la parte frontale che quella posteriore, rendendolo più resistente e meno soggetto a usura nel tempo.
Il tessuto in spugna aiuta ad assorbire il sudore ed è lavabile. Si consiglia di risciacquare i Terry Liner sotto acqua fredda corrente, con o senza un detergente delicato, strizzarli e lasciarli asciugare all’aria.
La vestibilità è identica a quella dei liner standard S1 Lifer ed è compatibile con tutte le calotte dei caschi Lifer, inclusi:
-
Lifer standard
-
Mini Lifer
-
Mega Lifer
Ogni set di Terry Liners include:
-
Un liner anteriore
-
Un liner posteriore
-
Strisce in Velcro per fissare il liner al casco
New wider design for more more sweat absorbing coverage.
Replace your S1 Lifer Helmet Sizing Liners with some fresh, durable, washable and sweat absorbing Terry Liners.
The S1 Lifer Terry Liner is a sewn terry cloth replacement sizing liner for the Lifer Helmet. The terry cloth is sewn onto the liner, sealed at the ends and covers the front and back of the liner making it more durable allowing it to not break down as fast as the standard Lifer sizing liners.
The terry cloth also helps absorb sweat and is washable. We recommend rinsing the Terry Liner under cold running water with or without light soap, wringing them out and air drying them.
The sizing of the S1 Lifer Terry Liner is exactly the same as our standard liners and are compatible with all of our Lifer Helmet Shells including our standard Lifer, Mini Lifer and Mega Lifer.
One set of Terry Liners come with a back and front sizing liner and Velcro to attach the liner to the helmet.
*** Installation Note ***
If you are adding these terry liners into a helmet that you have already worn please wash the contact points wear you plan to place the new Velcro with a wet cloth to wipe away any sweat residue that may have built up on the surface of the inner helmet shell. Doing this will ensure that the Velcro will stick firmly to the inner shell.